BUILD TUNE RACE RC YACHTS
New to radio sailing
Some key thoughts to avoid the pitfalls of acquiring a boat

This article was prompted by a gentleman down under who had been the victim of buying a second hand boat. The crafty seller cherry picked the boats hardware, sails, and one mast. So although a boat might have legitimate claims to past glory’s, it was not possible to reclaim past glory with the boat as presented for sale. It is a case of buyer beware, meaning take time to inspect a boat before buying one. To compound matters, it takes experience to know what you are looking for
In my opinion, there are 3 ways to enter the model yachting game.
Build your own boat and learn how they work from the inside out. Hull building, fitting the fin and rudder and fitting out to setting up the rig and electronics
Buy a second hand boat
Buy a brand new boat from a reputable supplier
Of course, as a start, you need to find a local club and see what classes they sail. If they sail one of the two Dragon Force classes life is easy as you can buy a boat in a box. At the most you will spend 600 or 900 to get the boat, electrics and all the rigs. Everything is top quality, all the boats are identical .
Build a boat
When I entered the game in 2020 as a COVID project, I committed to build a boat as I wanted to understand everything that makes the boats tick. Bear in mind I had not built a model before let alone one using Epoxy and glass but I persevered and made 2 nice Alternative design IOM’s. So if you feel confident to embark on a build project, that would be my recommendation, to make a beautiful wooden boat or a glass one.
When I sought information on IOMs and boat building there were many sites across the internet but nothing to really guide my project. I was lucky to chose a proven design (with detailed specifications) and with the information available on the web and help from the designer , I was able to produce two competitive boats. One major benefit of the supplied design sheets was that I had dimensions, and rake measurements for all the rigs, the exact location for the fin bulb and rake of the mast. All critical for a balanced boat. It gave me the complete picture so when I put the boat on the water it sailed perfectly without any need for modification.
I had to learn about electronics the hard way, study the manual, program an RMG winch and learn about end points, mixing and exponential settings. Bit of a nightmare when you first try to set up a transmitter but once you have achieved initial setup life gets easier. When you build a boat, do not expect it to be perfect but do enjoy the satisfaction of putting a boat on the water that you have built yourself. With the right design and some help from your local club members, you will have a competitive boat.
Buy a second-hand boat
Now you may elect to buy second hand. This is not as easy as it sounds as there are many pitfalls. When you buy a car life is simple. You know exactly what you are going to get, how fast the car is, its fuel consumption and you hope it is mechanically sound. With a boat, life is not that simple. You will see advice saying, buy a second-hand boat and pimp it up, but when you are new to the game, you have virtually zero knowledge so you could be buying a piece of junk or a thoroughbred racing machine and as for pimping up where do you start. Don’t be deceived into thinking, “I am a great dinghy/yacht sailor, so I know how to set all this up”. For example
Do you know what the top designs are?
Do you know which winches are the best and how are they set up?
Who are the better sail makers?
What type of Aluminium do you need for a mast?
What are the rig dimensions needed?
What cord do you need for the boat?
Do you have fin and bulb that give optimum performance?
Do you know how to set up a transmitter and receiver.